• ATE自动化测试部
• 通用仪器事业部
• 网络仪器事业部
• 电能仪器事业部

产品图片	产品名称/型号	产品简单介绍
	美国福禄克 FLUKE-C550 防水 防压 户外作业多功能便携包 中国区一级销售平台 FLUKE-C550	美国福禄克 FLUKE-C550 防水 防压 户外作业多功能便携包 中国区一级销售平台
	MA190 附件组，适用于医疗和视频应用 MA190 附件组，适用于医疗和视频应用	The MA190 accessory set enables interconnection of the Fluke ScopeMeter 190 Series for use in the field of Medical Imaging and Video systems. This kit includes: 50 Ohm BNC insulated feedthrough terminator. 50 Ohm BNC terminator with 10:1 signal attenuation. 1 Ohm current shunt for current measurements. Safety-designed BNC cable, 1.5 m (5 ft). Insulated BNC (f) to 4mm-banana plug adapter. Dual 4 mm banana receptacles (1 red, 1 black).
	ITP120 光隔离外触发探头 ITP120 光隔离外触发探头	Designed for use with Fluke ScopeMeter 123. The probe connects to the optical port of the ScopeMeter 123, and features isolated external triggering, for measurements that require external triggering or triggering on floating reference signals. Probe length is 1.2m (48 inch). The probe includes a hookclip with ground lead, and a 9-Volt Alkaline battery. Input impedance is 10MO in parallel with 15pF. Trigger level: TTL compatible (High = 2V, Low = 0.8V) Minimum pulsewidth: 7 µs Maximum frequency:
	HC200 测试挂勾组，2 红，2灰 HC200 测试挂勾组，2 红，2灰	Set of four Hook Clips (two red and two gray). Designed for use with VPS200, VPS100 and PM8918 series probes
	HC120 测试挂勾（每组2个：红、灰） HC120 测试挂勾（每组2个：红、灰）	Set of two (one red, one gray) Hook Clips, designed for use with STL 120 Shielded Test Leads and TL75 Test Leads. Accepts wires up to 2.5mm2. The contact material is made of reinforced nickel plated steel Maximum Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Wire Size: 2.5mm Contact Material: Nickel plated steel
	H900 测试线支架 H900 测试线支架	Heavy duty construction with mounting holes Holder has 10 slots for wires up to 8 mm in diameter Over-all dimensions: 27.9 cm L x 8.9 cm W x 3.2 cm H One year warranty
	Fluke 2600A-101 SPRT 探头 Fluke 2600A-101 SPRT 探头	The 2600A-101 is a precision four-wire, 100 Ohm SPRT (Secondary Platinium Resistance Thermometer) probe that have been designed and tested to meet the precision required as a secondary reference standard. The 2600A-101 has stripped leads suitable for connection to any Fluke data acquisition product or other screw terminal connector. This probe comes with calibration certificates and data for -200 to 500oC.
	DP120 差分探头 DP120 差分探头	The DP120 differential voltage probe is designed to make measurements on signals with floating reference. The DP120 has two probes with shrouded banana probe tips (one red, one black) and shielded cable for improved noise immunity. Input impedance between each input to shielding BNC is 5 MΩ in parallel with 6 pF. Input impedance between the inputs is 10 MΩ with a capacitance of 5 pF.
	BP980 双橡胶插头套件 BP980	5 pair (red, black) of double 4 mm banana plugs Each plug has 3.1 mm holes for mounting wires and components Brass plugs/jack, beryllium copper springs 30 V rms or 60 V DC, 15 A One year warranty
	AS200-R 探头附件组，红色 AS200-R	Probe Accessory Set for usage with VPS200 & PM8918 Series Scope Probes. Set includes 600V CAT III / 1000V CAT II rated : Industrial Alligator for Probe 2-mm Test Probe for Probe 2-mm Test Probe for Banana Industrial Alligator for Banana Ground Lead 4-mm Banana Max. Input Voltage: 600V CAT III, 1000V CAT II per IEC 1010-2-031 Max. Voltage to Ground: 600V CAT III, 1000V CAT II per IEC 1010-2-031
	AS200-G 探头附件组，灰色 AS200-G	Probe Accessory Set for usage with VPS200 & PM8918 Series Scope Probes. Set includes 600V CAT III / 1000V CAT II rated: Industrial Alligator for Probe 2-mm Test Probe for Probe 2-mm Test Probe for Banana Industrial Alligator for Banana Ground Lead 4-mm Banana Max. Input Voltage: 600V CAT III, 1000V CAT II per IEC 1010-2-031 Max. Voltage to Ground: 600V CAT III, 1000V CAT II per IEC 1010-2-031
	AC89 大负荷绝缘刺针测试夹 AC89	Single probe pierces 0.25 to 1.5 mm insulated wire Small pin allows self-healing of the insulation CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed One year warranty
	AC87 大负荷母线测试夹套件 AC87	One pair (red, black) of flat, right angle design for connecting to bus bars Adjustable collar provides 2 ranges of jaw openings up to 30 mm CAT III 600 V, 5 A rating. UL listed One year warranty
	AC72 鳄鱼夹组 AC72	Slide-on alligator clips (red, black) for TL71/TL75 Jaws provide 8 mm opening CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty
	AC285 SureGrip™ 鳄鱼夹 AC285 SureGrip?	SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of large alligator clips with nickel-plated steel jaws Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt Recommended for use with TL222 and TL224 test leads CAT IV 600 V; CAT III 1000 V, 10 A rating. One ye
	AC283 SureGrip™ 探针 AC283 SureGrip?	SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of nickel plated pincers open to 5 mm 11.4 cm flexible insulated shaft Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed One year warranty
	AC280 SureGrip™ 挂勾探针 AC280 SureGrip?	SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of nickel plated clips Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed One year warranty
	AC220 SureGrip™ 鳄鱼夹 AC220 SureGrip?	SureGrip™ accessories are designed to improve steadiness in slippery hands. Rubber overmolded surfaces and finger-hugging curves give the user a comfortable, reliable grip on the accessory so they can focus on making an accurate measurement. One pair (red, black) of small, insulated, nickel plated jaws Blunt tip grabs round screw heads up to 9.5 mm Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty
	AC120 鳄鱼夹 AC120	Set of three (one red, one gray, one black) safety designed insulated Probe Tip Alligator Clips. Designed for use with STL 120 Shielded Test Leads and TL75 Test Leads. Accepts standard 0.08’’ (2mm)-pin tip sized test probes. Nickel-plated steel jaw contact material with standard jaw opening of 5/16’’ (8mm).
	85RF 高频探头 85RF	The 85RF High Frequency Probe is designed to convert a DC voltmeter with a input impedance of 10M ohms into a high frequency (100kHz to 500Mhz) RF voltmeter. Conversion from AC to DC is accomplished on a one-to-one basis includes a range of 0.25 to 30V rms. The probe’s DC output is calibrated to be equivalent to the rms value of a sine wave input.